Duroflame Abel, Руководство пользователя

Страница: 27 / 38

Page 27 from 38
8.1.9 Convection fan
The convection fan blows air from the room through the heat exchanger to cool
the pellet stove. (Not included in every Duroflame model)
8.1.10 Encoder
This is a sensor that measures the speed of the flue gas fan. This is usually a
black cap on top of the flue fan with a small wheel inside. On a pellet stove with
a continuously running auger motor, this encoder is also on the auger motor.
8.1.11 Flue gas temperature sensor
This is a sensor that measures the temperature of the flue gases. In this way,
the stove can determine how much fire is present in the stove.
8.1.12 Room temperature sensor
This is a sensor that measures how warm it is in the room. Based on this, the
stove can determine whether it should modulate. Make sure that this sensor is
placed in a representative place. Do not place it directly on the floor or against a
wall. In that case it will not measure the ambient temperature but the floor or
wall.