-18-
Set the action mode changing knob to the
symbol.
CAUTION:
Never use “rotation with hammering” mode when the drill chuck assembly is installed
on the tools. The drill chuck assembly maybe damaged. Also the drill chuck will come
off when reversing the tool.
Use the quick change drill chuck as standard equipment.
When installing it, refer “installing or removing the bit” described on the previous page.
Hold the ring and turn the sleeve counterclockwise to open the chuck jaws. Place
the bit on the chuck as far as it will go.
Hold the ring firmly and turn the sleeve clockwise to tighten the chuck.
Set the action mode changing knob to the
symbol. You can drill up to
13mm(1/2”) dia. in metal and up to 26mm(1”) dia. in wood.
