-16-
INSTALLING THE DEPTH GAUGE
Fig. 10
The depth gauge is convenient for drilling holes of uniform depth. Press the button and
insert the depth gauge into the hole in side grip. Adjust the depth gauge to the desired
depth and release the button to fix the gauge.
NOTE:
The depth gauge cannot be used at the position where the depth gauge strikes against
the gear housing.
BATTERY POWER INDICATOR
Trigger the tool and Battery Indicator to show the battery pack’s remaining capacity
1.
One light ON: 30% remaining capacity.
2.
Two lights ON: 60% remaining capacity.
3.
All lights ON: 100% remaining capacity.
OPERATION
Always check the direction of the rotation before use.
HAMMER DRILLING OPWERATION
Set the action mode changing knob to the
symbol.
Position the bit at the desired location for the hole, then depress the switch trigger.
Do not force the tool. Light pressure gives best results.
NOTE
Button
