-13-
To avoid rapid wear on the mode change mechanism, be sure that the action
mode changing knob is always positively located in one of the three action
mode position.
When changing from the
symbol mode to the
symbol mode, the action
mode changing knob may no longer move in the
symbol position. At this
time, turn the tool on or turn the chuck by hand in the
symbol position and
then rotate the action mode changing knob. Forcing the action mode changing
knob may cause tool damage.
BUILT-IN LED AREA LIGHT
Your tool has a built-in LED light to illuminate the work area and improve vision when
drilling/driving in areas with insufficient light.
ELECTRIC BRAKE
The variable speed switch is equipped with a circuit designed electric
brake function. The tool will promptly stop rotating after the switch is
fully released – This is the normal function of an electric brake.
ASSEMBLY
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery release button (see Fig. 7C), and
pull battery pack out of tool.
TO INSTALL BATTERY PACK: Align rails (see Fig 7B), on the tool with the four
tabs on the battery pack, and push battery pack onto tool until it locks in place.
