manualshive.com logo in svg

Dürkopp Adler 878-160722-M, Руководство по эксплуатации

Поделиться
Скачать
Dürkopp Adler 878-160722-M Скачать руководство пользователя страница 9

Safety

Operating Instructions 878-M PREMIUM - 06.0 - 11/2021

7

2 Safety

This chapter contains basic information for your safety. Read the 
instructions carefully before setting up or operating the machine. 
Make sure to follow the information included in this section. Failure 
to do so can result in serious injury and material damage.

2.1 Basic safety instructions

The machine may be used only as described in these operating 
instructions.
The operating instructions should be available at the machine's 
location at all times.

Work on live components and equipment is prohibited. Exceptions 
are defined in the regulations set forth in DIN VDE 0105.

For the following work, the machine must be disconnected from 
the power supply using the main switch or by disconnecting the 
power plug:

• Replacing the needle or other sewing tools
• Leaving the workplace
• Performing maintenance work and repairs
• Threading (can be used the lock button)

Missing or faulty spare parts could impair safety and damage the 
machine. Make sure you only use original replacement parts from 
the manufacturer. 

Transport

Use a sturdy lifting carriage or stacker for transporting the ma-
chine. Raise the machine max. 20 mm and secure it against 
slipping off.

Setup

The power cable must have a plug authorized for the country in 
which the machine is being used. The power plug may only be 
connected to the power cable by a qualified specialist.

Содержание 878-160722-M





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды