Dürkopp Adler 878-160722-M, Руководство по эксплуатации

Страница: 126 / 180

124 Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
Software /
Stitch Counter
In Software mode,
the bobbin is
monitored by the
software based on
the number of
stitches sewn.
Counter Type
4 different counters can be
applied. The following 3 sub-
items can be set for each of
the counters.
Value range
A/B/C/D
Counter value
Bobbin supply capacity in
stitches. This is a very
variable value, which
depends on the size of the
bobbin and the thickness of
the thread.
Value range
00000 to 99999
Sewing stop
Sewing stops and a notice is
shown on the display when
the bobbin is detected to be
nearly empty. If the parameter
is not activated, only the
LEDs on the machine arm
give a warning if the bobbin is
empty.
Value range
On/Off
Sewing foot lower
position
Value range
On/Off
Reset necessary
It is only possible to resume
sewing after changing the
bobbin and confirming the
message on the control
panel.
Value range
On/Off
Menu item Setting 1 Setting 2