Dürkopp Adler 878-160722-M, Руководство по эксплуатации

Страница: 111 / 180

Operating Instructions 878-M PREMIUM - 06.0 - 11/2021 109
Adjustments for seam end bartack parameters
Bartack at seam end
Value range
On/Off
Number of stitches backwards
Value range
01 to 50
Number of stitches forward
Value range
01 to 50
Number of bartack sections
A bartack consists of several sections.
If the sewing direction is changed, a new
section is started. The number of sections
in a bartack can be set here.
Value range
01 to 99
Stop-Time for direction change
The waiting time at the turning points
(e.g. for a change of sewing direction)
is set at this point. A short waiting time in
milliseconds should ensure consistent
seam quality (ornamental-stitch bartack).
Value range
0000–1000 [ms]
Stitch length default
If this function is active, the same needle
stitch length is used for the bartack as the
one set in Manual mode. If this function is
deactivated, a custom input can be
entered.
On/Off
Stitch length of stitches
forward
Value range
0.1 to 7.0 [mm]
(depending on subclass)
Stitch length of backwards
stitches
Value range
0.1 to 7.0 [mm]
(depending on subclass)
Speed in bartack
Value range
50 to 2000 [1/min]
Icon Parameter Settings