DURKOPP ADLER class 743-221, Руководство по аксессуарам

Страница: 9 / 21

3.8 Securing at the Seam End
End securing at the seam end is selected by pressing this key.
The end securing is only conducted if it is activated with the " " key.
–
Press the key.
Securing through stitch condensation is selected.
The LED is lit.
–
Press the key.
Securing through seam bar tacking is selected.
The LED is off.
3.9 Securing Activation
The selected securing at the seam beginning or at the seam end is
activated by pressing this key.
–
Press the key.
Dependent on which LEDs are lit that securing is active.
Securing through stitch condensation or bar tack:
Seam beginning with Seam end with
Seam beginning without Seam end with
Seam beginning with Seam end without
Seam beginning without Seam end without
3.10 Smoother
The smoother is activated by pressing this key.
–
Press the key.
The smoother is activated. The LED is lit.
–
Press the key.
The smoother is deactivated. The LED is off.
3.11 Blower
One selects if the sewing piece is blown out from above or from the
right by pressing this key.
The corresponding blower device must be installed.
–
Press the key.
Depending on which LEDs are lit the blower from above or from
the right is active or the blowing is turned off.
Blower from above
Blower from the right
Blower turned off
9