DURKOPP ADLER class 743-221, Руководство по аксессуарам

Страница: 11 / 21

4.2 Sewing Program for Darts
The program positions 10 ...29 are available for free programming of
darts and pleats.
The programming mode is activated by pressing the " P " key for
minimum 3 seconds.
The value shown is changed with the " + " and " - " keys.
The value is immediately saved in nonvolatile memory.
The next program step is called up with the "
Σ
" key.
At the last program step the return to the 1st program step occurs by
pressing the "
Σ
" key.
The programming mode is exited by pressing the " P " key.
Example:
Program position 10 is programmed.
–
Set the " Program " switch to 10.
–
" Turn the main switch on " or press the " STOP " key.
Program 10 is activated.
The sewing unit requests a reference run.
–
Press the "
Σ
" key.
The reference run is conducted.
–
Press the " + " and " - " keys at the same time.
The piece counter is reset to 0000.
–
Press the " P " key for 3 seconds.
The programming mode is activated.
Set the rpm for sewing.
Setting range: 3800 - 4800 min
-1
Resolution: 100 min
-1
–
Press the "
Σ
" key.
Set the rpm for bar tacking at the seam beginning.
Setting range: 1000 - 3000 min
-1
Resolution: 100 min
-1
–
Press the "
Σ
" key.
Set the rpm for bar tacking at the seam end.
Setting range: 1000 - 3000 min
-1
Resolution: 100 min
-1
–
Press the "
Σ
" key.
Set the rpm for the advance.
Setting range: 3000 - 4000 min
-1
Resolution: 100 min
-1
–
Press the "
Σ
" key.
Rpm for thread chain.
This value can not be changed !
Setting range: 1000 min
-1
–
Press the "
Σ
" key.
Set the rpm for Softstart.
Setting range: 200 - 1000 min
-1
Resolution: 100 min
-1
–
Press the "
Σ
" key.
Set the number of stitches for the advance.
Setting range: 0 - 20 stitches Resolution: 1 stitch
11