DURKOPP ADLER 991-210-10 Series Скачать руководство пользователя страница 45

Страница: 45 / 150

Sewing foot lift

Service Instructions 911-210-10 - 00.0 - 06/2020

Push the lever (4) up and monitor the display.



It will show 103 or -103.

10. Check that the toothed rack still has about 0.5 mm clearance from

the stop.

11. If necessary, set the light barrier again using the mounting plate.

9.3

Adjusting the left stop screw

Proper setting

The left stop screw (3) of the lifting gear must be set so that the lever (1)
performs no stroke when it is lying against the stop block (4). The levers
of the lifting gear (5) overlap.

To adjust the left stop screw:

Switch off and on the machine again.

Reference the machine.

Press

Extras

Service

Multitest (Multi test)

Hublage

einstellen (Set stroke position)

Press

Hüpfer/Drücker (Jumping foot/presser foot)

until

the presser foot is selected.

Press down and turn the hand crank and check that no stroke is
performed.

Fig. 30: Adjusting the left stop screw

Loosen the nut (2).

Turn the stop screw (3).

Tighten the nut (4).

(1)

- Lever

(2)

- Nut

(3)

- Stop screw

(4)

- Stop block

(5)

- Lifting gear lever

①

②

③ ④

⑤

Содержание 991-210-10 Series























































































































































Результаты поиска

Содержание 991-210-10 Series

Отзывы:

Бренды по названию

Популярные бренды

DURKOPP ADLER 991-210-10 Series, Инструкция по эксплуатации

Результаты поиска

Содержание 991-210-10 Series

Отзывы:

Бренды по названию

Популярные бренды