manualshive.com logo in svg

DURKOPP ADLER 991-210-10 Series, Инструкция по эксплуатации

Поделиться
Скачать
DURKOPP ADLER 991-210-10 Series Скачать руководство пользователя страница 29

Positioning the arm shaft crank

Service Instructions 911-210-10 - 00.0 - 06/2020

27

4

Positioning the arm shaft crank

Fig. 14: Positioning the arm shaft crank

Proper setting

The threaded pins (2) on the arm shaft crank (1) are seated completely on 
the flat.

To set the arm shaft crank:

1.

Disassemble the arm cover (

p. 16

).

2.

Loosen the threaded pins (2).

3.

Turn the arm shaft crank (1) such that the threaded pins (2) are seated 
completely on the flat of the arm shaft.

4.

Push the arm shaft crank (1) to the right as far as it will go.

5.

Tighten the threaded pins (2) on the arm shaft crank (1).

WARNING

Risk of injury from moving parts!

Crushing possible.

Switch off the machine before you check and set 
the position of the arm shaft crank.

(1)

- Arm shaft crank

(2)

- Threaded pins

①

②

Содержание 991-210-10 Series























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды