16 |Tracking Belt — Maintenance
AS40 Manual
Belt Tracking at Drive End
Belt Tracking at Tail End
CARET-LEFT
CARET-LEFT
MAINTENANCE
With conveyor running,
rotate square head tracking
screw toward drive pulley on side
where belt is riding too close.
2
Let belt make several
rotations to ensure
proper tracking.
2
Re-tighten driver assembly
screws.
(Three on each side)
6
x
4
Loosen three driver
assembly screws on each
side of bearing block.
6
x
1
Rotate adjustment screw to
move tail on side where
belt is riding too close.
1
Let conveyor make several
rotations to ensure belt is
tracking properly.
3
For best results, make adjustments to only one side.
The Drive End is tracked when the belt can make a full revolution without contacting either bearing plate.
Tail End is tracked when belt can make a full revolution without contacting either side of frame.
To see a video of this process, scan this code on your phone or tablet.
You may also visit
https://qcconveyors.com/videos/as40-belt-tracking/
