manualshive.com logo in svg

Duratech HAYBUSTER CMF-430, Инструкция по эксплуатации и перечень запасных частей

Поделиться
Скачать
Duratech HAYBUSTER CMF-430 Скачать руководство пользователя страница 23

13

  C M F - 4 3 0    

O P E R A T I N G   I N S T R U C T I O N S

Section 3: Operation

To insure long life and economical operation, we highly recommend the operator of the CMF-430 be thoroughly 

instructed in the maintenance and operation of the machine.  There is no substitute for a sound preventative maintenance 

program and well trained operator.

Prior to starting the engine of the tractor, we recommend the operator make a visual inspection of the unit.  This can be 

done as the lubrication is being carried out.  Any items that are worn, broken, missing or needing adjustment must be 

serviced accordingly before operating the CMF-430. 

3.1 Pre-starting inspection instructions

WARNING:

 Before inspecting the machine, use the normal shut-down procedure in Section 3.11

.

Check the following:

q

  Hydraulic components for leaks or damage.

Warning: 

 Hydraulic fluid escaping under pressure can be almost invisible and can have sufficient 

force to penetrate the skin.  When searching for suspected leaks, use a piece of wood or cardboard 

rather than your hands.  If injured, seek medical attention immediately to prevent serious infection or 

reaction.

q

  Check for loose bolts, worn or broken parts.

q

  Lug nuts for tightness. Torque to 130-184 ft lbs. (18-25 kgm)

q

  Condition of tire rims.

q

  Tires for proper air pressure. (44 PSI or 300 kPa cold)

q

  Installation and condition of shields.

q

  Installations of slow moving vehicle (SMV) sign if required.

q

  Condition of decals.

q

  Gearbox oil levels.

Содержание HAYBUSTER CMF-430













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды