manualshive.com logo in svg

Duratech HAYBUSTER CMF-430, Инструкция по эксплуатации и перечень запасных частей

Поделиться
Скачать
Duratech HAYBUSTER CMF-430 Скачать руководство пользователя страница 19

9

  C M F - 4 3 0    

O P E R A T I N G   I N S T R U C T I O N S

1.5 Safety review section

BEFORE OPERATING

•

 

Read and follow all instructions contained in:

 

1. 

This CMF-430 operator’s manual

 

2. 

Tractor operator’s manual

 

3. 

Decals on the CMF-430

Note: 

 Additional copies of the above mentioned materials can be obtained from your dealer.

•

 

Allow only responsible, properly instructed individuals to operate your machine.  Provide proper training 

and carefully supervise inexperienced operators.

•

 

Use a tractor which meets the tractor requirement contained within this manual.  Additional weights may 

be necessary.

•

 

Make sure all bystanders and other workers are clear before starting the tractor and CMF-430.

•

 

Make no modifications to the machine unless specifically recommended or requested by DuraTech 

Industries.

•

 

Check periodically for breaks or unusual wear and make any necessary repairs.

•

 

Securely attach to towing unit.  Use high strength, appropriately sized hitch pin with a mechanical 

retainer.

•

 

If required install P.T.O. safety chain, check local regulations regarding safety chain requirements.

•

 

Be sure that there are no tools lying on or in the CMF-430.

•

 

Because it is possible that your CMF-430 may be used in dry areas or the presence of combustibles, 

special precautions should be taken to prevent fires and fire fighting equipment should be readily 

available. 

•

 

Do not allow anyone to stand between the tongue or hitch and the towing vehicle when backing up to the 

CMF-430.

Keep sufficient distance away from electrical power lines.

WARNING: Electrocution is possible when running this machine during an electric storm or heavy fog.

NO SMOKING IN THIS AREA

DANGER! NO OPEN FLAMES 

IN THIS AREA

Содержание HAYBUSTER CMF-430













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды