13
Assembly
Turn the mounting ring clockwise to release the curved end and insert the pipe with the
search coil into the mounting ring. Adjust the length until you are comfortable and can
stretch out your arm. Turn the mounting ring counter-clockwise to strengthen the connec-
tion when the search coil is about 1.5 cm above the ground.
1 Device controller
2 Mounting ring
3 Connector
4 Cable
5 Search coil
6 FALSE
7 CORRECT
Attach the plastic bracket
with 2 screws to the end of
the unit and fit the control
unit over the 2 holes on the
curved passing.
Wrap the cable of the search
coil around the holding tube
so that the elasticity is kept
moderate and the cable can-
not swing around. Then plug
the cable into the connector
on the bottom right of the
controller.
The armrest has 2 posi-
tions. As a default, the long
position is set. For shorter
arms (for example, women
/ children), the armrest may
be adjusted. Loosen the
screws on the left and right
down to the support, move
the armrest forward and fix
the bracket again.
Содержание 10004781
Страница 1: ...10004781 Metalldetektor ...
