Durafly SUPERMARINE SPITFIRE MK24 V2, Инструкция по эксплуатации

Страница: 16 / 26

1. Seat wing to the wing bay by threading
the leads from the hole at the bottom of
the wing bay to the receiver hatch,
2. Slightly pull the leads from the receiver
hatch before fully fit the main wing into
place to avoid any tangling to prevent the
wing from fully mounting.
3.
Check to make sure the main wing before
secure it into place using the provided
self tapping screws, two pieces (A)
to hold the wing front into place. The
PA 2.6*45 pieces are used to secure the
rear side of the wing into place.
PA 2.6*50
Mount the main wing
Install the main wing
2
1
3
A B
P.13