Durafly ME-163 V2, Инструкция по эксплуатации, Страница: 6 / 26

3
ASSEMBLY:
Note: For the assembly of the Durafly Me-163 Komet use a good quality foam contact adhesive
such as "UHU Por".
1. Before you start assembling it is necessary to flex each control surface back and forth 6 to 8
times to release the tension of the reinforced hinge line.
2. Attach the elevon control horns using the screws provided. As this is a fast model we also
recommend you apply a little drop of foam contact glue to the base of the horn for extra security.
Set the servo arm at neutral and attach the servo pushrod (see further on in this manual for the
elevon neutral setting).
PB1.7X10mm