Durafly ME-163 V2, Инструкция по эксплуатации, Страница: 11 / 26

Assembly of your Durafly Me-163 V2 is now complete.
Before you move onto the final set-up of the model, we suggest
you perform a quick check on all screws, bolts and components to
ensure all are secure and firmly in place.
1. Use the below image as a guide to install your receiver and flight battery. When using the
recommended 2200mah 4S battery, these positions should make your model balance at the
approximate CG mark covered in the next stage of this manual.
Note: If you are using a lower capacity (and therefore lighter) battery, you will have to install this
pack further forward of the point shown in order to attain the same approximate CG position.
RECEIVER AND BATTERY INSTALLATION:
8