DuraComm PSDA-MU1, Руководство пользователя

Страница: 37 / 47

Page 37 of 47
User Setup – Continued
User Setup Notes
Only Admin level users have access to this page. Up to 8 Users can be configured.
Password changes and SITEGUARD hard resets are performed by using this page. Care should be taken when
changing any of these settings.
SNMPV3 Security settings for each user are also on this page. To enable SNMPV3, see the Device Setup page.
NOTE: To hard reset your device back to factory network settings, press the red button on the SITEGUARD PCB
and hold it for more than 20 seconds. You will need to re-connect to the SITEGUARD through your web browser
by entering the factory supplied IP address and HTTP port (see Network Setup).
NOTE: Using the factory reset here or will erase all annunciator settings, and they must be restored by the
factory, and the product must be reconfigured for your system.