DuraComm PSDA-MU1, Руководство пользователя

Страница: 18 / 47

Page 18 of 47
Section 4: Remote Monitoring Configuration and Operation
SITEGUARD Description
The new SITEGUARD DC-Powered Remote Monitoring and Control Unit (RMCU) is flexible product for remote site
monitoring and control, and Industrial Internet of Things (IIoT) applications. The SITEGUARD provides 8 voltmeters, digital
inputs, digital outputs, and analog outputs that are dedicated to annunciator operation and monitoring. All of these channels are
visible on the home page with alarm status, and all analog channels are displayed as bar graphs with alarm setting indicators,
and alarm status color. Configuration is set at the factory with only a few setup changes required to install for a PSDA-
MU1Application.
NOTE: Changes to other settings should only be considered if the factory settings do not perform
correctly in your installation. Other changes may cause unpredictable or unsafe operation .
•
Internet Networking Addresses
•
Usernames and Passwords
•
Device Name
•
Date & Time (and NTP)
•
Channel Names (optional – factory configured)
•
Alarms (Optional – factory configured)
•
Email Notifications (optional)
•
SNMP Monitoring (optional)
•
Audible Alarm Mute Cancel Schedule (factory set to 13:40 every day of the week) This only applies if the mute
has not been cancelled manually or by a non-alarm all normal condition.)
Admin and Control Users will be able to configure all of the input and output settings, and set the state of the digital
outputs. Admin and Control users can set device settings for logging, time, and Site Name. Admin users have exclusive control
of network configuration, including manual time setting or NTP, soft reboot of the SITEGUARD, factory reset of the entire
configuration, and user passwords.
The SITEGUARD comes with the DuraComm three-year warranty.