DuraComm PSDA-MU1, Руководство пользователя

Страница: 34 / 47

Page 34 of 47
ALARM SETUP EXAMPLE FOR BAR GRAPH
The following is an example to set up alarms and bar graph limits for the status page.
Select Channel
Alarm Setup Notes
To set up analog alarms, first you must select the alarm channel to set. This is accomplished by selecting the
custom name of the channel in the dropdown box next to the “Analogs” label. For example, we are looking at the
settings for the “Amp Meter #1” channel in the screen above. “Ammeter #1” is the name given to this channel in
the Sensor Setup screen. AC Monitor and Temperature channels have their own section.
Do not change the “Alarm Contacts” factory setting for any channel or improper operation will result.