background image

v

This guide for use by qualified installers only

Important Safety Instructions

IMPORTANT: Read and save this 

Installation

 

Guide

 

for future reference.

This chapter contains important safety instructions for the 

Duracell 

Inverter 3000

1. Before installing and using the 

Duracell Inverter 3000

, read all 

instructions and cautionary markings on or provided with the 

Duracell Inverter 3000

, the batteries, and all appropriate sections of 

this guide.

2. Do not expose the 

Duracell Inverter 3000

 to rain, snow, spray, or 

bilge water. To reduce risk of fire hazard, do not cover or obstruct the 
ventilation openings. Do not install the 

Duracell Inverter 3000

 in a 

zero-clearance compartment. Overheating may result.

3. To avoid a risk of fire and electric shock, make sure that existing 

wiring is in good condition, adequately rated, and not undersized. Do 
not operate the 

Duracell Inverter 3000

 with damaged or substandard 

wiring.

4. Do not install or operate the 

Duracell Inverter 3000

 if it has received a 

sharp blow, been dropped, or otherwise damaged in any way. If the 

Duracell Inverter 3000

 is damaged, see the Warranty section.

5. Do not disassemble the 

Duracell Inverter 3000

. It contains no user-

serviceable parts. See Warranty for instructions on obtaining service. 
Attempting to service the 

Duracell Inverter 3000

 yourself may result 

in a risk of electrical shock or fire. Internal capacitors remain charged 
after all power is disconnected.

WARNING: Shock, fire, and heat hazard. Risk of 
injury to persons.

Inverter_3000_Install_Guide.book  Page v  Tuesday, June 3, 2008  12:22 PM

Содержание Inverter 3000






































Отзывы: