Duracell Inverter 3000, Руководство по установке

Страница: 27 / 37

2–10 975-0445-01-01
This guide for use by qualified installers only
• Copper chassis ground cable, as selected in “Selecting Cable Sizes”
on page 2–6 .
• AC output cable (if using the hardwire terminals)
• Battery isolator (if connecting to a multiple-battery system)
• Two provided DC terminal covers
1
• Battery selector switch
2
• Alternator controller
2
• High-output alternator
2
Overview of Installation Steps
These are the five steps for installing your inverter. Do not proceed with
installation until you have read
“Designing Your Installation” starting on
page 2–1 .
1. Install the Remote On/Off Switch.
2. Mount the inverter.
3. Connect the chassis ground.
4. Connect AC output (if connecting to an existing AC circuit).
5. Connect the DC cables.
Installing the Remote On/Off Switch
The Remote On/Off switch can be plugged into the remote switch jack on
the front of the inverter. The remote switch lets you turn the inverter on
and off from a convenient location—up to 20 feet (6 m) away from the
inverter.
1.Negative DC terminal black cover (part number: 064-3001-01),
Positive DC terminal red cover (part number: 064-3002-01)
2.
Optional equipment only. Use as needed by your specific installa-
tion.
Inverter_3000_Install_Guide.book Page 10 Tuesday, June 3, 2008 12:22 PM