54
7
Adjust the paper feed pressure
adjusting lever to “3”.
• When the paper slips or non-feed occurs, raise the
paper feed pressure one level at a time until the
optimum paper feed pressure is obtained.
Set the paper feed pressure within the range
of 3 to 6.
• When the paper slips and the unit stops, gradually
raise the paper feed pressure one level at a time.
• When the paper slips, the display window shows
[-
1
-].
8
From here, refer to “Operation
Procedures” on page 19.
• When replenishing paper, raise the cross folding
lever as shown in the figure first.
Cross folding consists of not only the single
folding of B4, double folding of B5, but the
letter folding of B5.
11-3. CROSS FOLDING UN-FIXED PAPER
11. CROSS FOLDING
1
First set the paper length input mode
and measure the length of the paper.
If the paper length is 360mm for
example, input this value on the
keypad.
R e f e r t o “ 1 0 - 1 . F I X E D F O L D I N G
PROCEDURE” on page 44.
2
Register the paper length input.
• Continue pressing the “Number of sheets/paper
length” button until the buzzer sounds.
• The “paper size” and “Number of sheets/paper
length” display windows will switch to the paper
length folding mode display shown in the figure.
Paper feed pressure adjusting lever
Cross folding lever
