23
7. OPERATION PROCEDURES
11
Check the folded paper for testing.
• Proceed onto the next step if the sheets of paper
have been folded satisfactorily.
Check the second ejected paper to confirm
that folding is performed correctly.
• If the sheets of paper have not been folded
satisfactorily, refer to the following steps.
óIf folding has slipped in the vertical direction:
Press the “folding stopper adjustment” button and
adjust the folding slippage.
Refer to “Adjusting the folding slippage in the
vertical direction” on page 36.
òIf the folding has slipped in the horizontal direction:
Rotate the “slant correction knob” and adjust the
folding slippage.
Refer to “Adjusting the folding slippage in the
horizontal direction” on page 40.
Check the folding slippage in the horizontal
direction with the second sheet of test fold
sample.
12
Perform test folding again and make
sure that there is no slippage.
• To register the corrected stopper position, refer to
“Registering the Folding Stopper Correction” on
page 38.
Even if the paper of one size is used, folding
slippage in the vertical direction may occur
because of the kind of paper used, the paper
thickness, processing speed.
It is therefore necessary to adjust the folding
stopper slightly.
Paper for testing folding
Slant correction knob
