20
7. OPERATION PROCEDURES
5
Press the “fold mode selection”
button and select the desired fold
mode.
• When the right “folding mode selection” button is
pressed, the lamp on the right of that currently lit
will light up.
• When the left one is pressed, the lamp on the left of
that currently lit will light up.
• If “special folding” had been registered previously,
“special folding” modes 1 and 2 can be selected by
pressing these “folding mode selection” buttons. If
no special folding methods have been registered,
the special folding mode cannot be selected and
instead the fixed folding mode will be set.
6
Check the paper size display.
• When paper outside the fixed size is used, the size
of the paper will not be detected automatically and
consequently not displayed.
When using such a kind of paper, refer to
“Using Non-Fixed Paper” on page 44.
