Duplo DF-1000, Инструкция по эксплуатации

Страница: 57 / 86

4-7
<Example 2>
When folded plane length B is 3 mm
longer than folded plane length A
1. CORRECTING FOLDING MISALIGNMENT
direction
–1.5 mm
–1.5 mm
A4 -1.5/ ...
STAND BY
In this example, by shortening the folded plane length B by 1.5 mm, A will become 1.5
mm longer, and as a result, folding misalignment of 3 mm in total can be improved.
To shorten B, press the “–” key and move the folding stopper in the direction
shown
below . To shorten B by 1.5 mm, press the “–” key until “–1.5/ …” appears on the LCD.
3 mm
+1.5 mm
Folding plate 1 folding
stopper adjusting key
The corrected value can be registered for standard folding of standard paper. (Refer to “(5)
Registering folding misalignment correction values” (
p.4-10).)
For details on the correction methods of other folding modes, refer to “(4) Correction
method by folding mode” (
p.4-9).