Duplo DBM-70, Инструкция по эксплуатации

Страница: 12 / 17

DBM70 Instruction ver 1.doc Page 11 3/12/01
5. BOOKLET MAKING.
2. The machine will not operate with the top safety cover in the raised position. After closing
the top safety cover it is necessary to press the circuit reset button, located in the left hand
inside side wall. This is an added safety feature and the machine will not cycle until the
button is pressed.
ON/OFF button
Reset button
Stapling delay
control
Note:
The reset button must be pressed each time
the lid is raised to re-start machine
Figure 8 - Operating controls
3. When the machine is switched on the motor will start when the reset button is pressed. If it
is left running and not used for a period of more than three minutes the motor will
automatically switch off. The online collator will not start until the bookletmaker motor is
running.
4. The stapling / folding operation is started when sensors detect the paper in the machine. The
time between the paper entering the machine and the stapling action can be varied. This is
achieved by turning the Stapling Delay Control shown in figure 8 clockwise for more time
and anti-clockwise for less. When first using the machine, give the Stapling Delay Control a
quarter turn clockwise. This will give time for the operator to settle the paper between the
guides before the machine cycles.