Duplex 280i AC, Руководство по эксплуатации и обслуживанию

Страница: 113 / 338

F.16
DUPLEX 280i
1.1
113
16
16
11
A B
Rev.
OPERATION AND USE
6.6 Motor Protector
The “Motor Protector” 16 , is a safety device which stops the appliance in case conditions
occur that overload the motor (e.g. foreign bodies caught in the brushes which can prevent
their rotation, locking of the brushes for failed start-up due to great friction with the floor,
mechanical fault, electric motor fault, poor supply of power, overheating, etc.).
As a sudden stop occurs, the button 16 comes out of its seat and the appliance stops
working (figure A ).
To reset the appliance, proceed as follows:
1) Disconnect the appliance from the mains or battery.
2) Remove possible foreign bodies stuck in the brushes.
3)
Connect the appliance to the mains or battery.
4) To restart the appliance, press the button 16 two minutes after the occurrence of the
stop (figure B).
WARNING
For the DUPLEX 280i DC model only:
The sudden stop of the appliance is indicated by the red LED (11)
that flashes intermittently until the reset is carried out.