20
5.3.6 Calibration reminder function
The factory presetting is an activated visual calibration reminder alarm .
If you want to keep it, press
for 3 seconds when
CAL
and are flashing to leave the programming sublevel .
If you want to deactivate the calibration reminder, select
with the
▲
or
▼
button and acknowledge with
.
When
SET
flashes again, press
three seconds to leave the sub sub level .
When
pH
flashes again scroll with the
▼
buttons to
Temp
2
or
Time
to proceed programmation or press
for 3
seconds to return to operating mode .
Advice:
The audible alarm for pH and calibration reminder can not be separated. If the audible pH alarm is
deactivated, the audible calibration reminder alarm is deactivated as well. The optical alarm is not affected from
that.
