Technical Information
LVB
Page 3 of 12
Extended functionality
Extended functionality
Extended functionality
Extended functionality
If necessary your technical support can change parametrisation or do additional
diagnosis by using the serial interface.
The following functions are disabled on delivery status, but can be enabled by
parametrisation:
Auto blanking
Auto blanking
Auto blanking
Auto blanking
Interrupted beams are automatically blanked if the configuration value
"Auto
blanking on cal."
is set to "1".
Please notice that beams must be covered completely for the auto blanking procedure.
If beams are blanked LED A turns on.
Diagonal beams
Diagonal beams
Diagonal beams
Diagonal beams
With additional diagonal beams the protection density of your light grid system can be
increased.
Status
Diagonal beams off
(standard)
Diagonal beams on
View
