Duncan DO 07185, Руководство пользователя

Страница: 25 / 62

23
Lubrication
Precautions
Study the correct procedure
before starting work.
Keep the service area clean
and dry.
Only service or lubricate the
machine when it is stationary
and securely supported.
Only service or lubricate the
machine when the hydraulics
are disconnected or isolated
and the working parts are not
powered or moving.
Precautions with Grease
Grease nipples and the grease gun should
be carefully cleaned before use to prevent
dirt being forced into the bearings.
Dirty grease should be forced from the
bushes and disposed of safely.
Greases should not be mixed as the
structure may be weakened by the mixing of
different types of thickener, which may
cause softening and loss of grease from the
bearings by running out.
After lubrication, wipe off the excess grease
and dispose of safely.
Item Components Lubricant Frequency
1 Wheel Bearings Castrol LMX Grease Annually
2 Wheel Leg Pivots Castrol LMX Grease 6 Monthly
3 Gearbox (1) Castrol Hyspin AWH 32/68 Oil (1.25 Litres) Maintain Level
4 Drive Chains (6) Suitable Roller Chain Lubricant
See Maintenance Schedule
5 Drive Shafts (Pedestal) Pre-packed & Sealed (Refer Page 44, 47) Not Required
6 Agitator Shaft Supports Nylon Bushes (Refer Page 53) Not Required
7 Seeder Shafts Nylon Supports (Refer Page 54) Not Required
8 15/23T Sprocket Glycodur Bearing (Refer Page 32) Not Required
9 Disc Opener Bearings Pre-packed & Sealed Not Required
10 Disc Arm Castings Castrol LMX Grease Weekly
11 Disc Opener Fr. Pivots Castrol LMX Grease Monthly
12 Turnbuckle Castrol LMX Grease Monthly
Lubrication Chart
Lubrication Points on the Linkage Renovator
Pt. No. 67376
Issue 0207
3
11
12
4
5
4
8
9
10
2
7
4
6
1
Maintenance & Care
Lubrication Instructions
Fig 17
Fig 18
Table 9
The lubrication frequencies are only a guide. Actual frequency will be dependent on extent of use and
ground conditions