manualshive.com logo in svg

Duncan DO 07185, Руководство пользователя

Поделиться
Скачать
Duncan DO 07185 Скачать руководство пользователя страница 12

10

SAFETY - Machine Specific
(Continued)

Hazard Points on the Linkage Renovator
(Continued)

Drive Chain Guards

To prevent hands, etc. getting caught in drive chains, guards
are provided to cover sprockets, chain and chain tensioners
mounted on the side of the Drive Leg Assembly and Main
Frame Assemblies. These guards must be fitted while using
the machine. 

Warning

: Access to pinch points is still possible from

underneath the guard.

Pedestal Chain Cover

To prevent hands, etc. getting caught in the gearbox drive
chain, the pedestal cover is provided to cover sprockets, chain
and chain tensioner mounted on the side of the Drive Pedestal
Assembly. This guard must be fitted while using the machine. 

Warning

: Access to pinch points is still possible from

underneath the guard.

For guard locations on machine, refer Page 11.

Calibrating

Be particularly careful when calibrating the seeding rate. At
this time, the calibration trays have been removed and are no
longer covering the rotating seeder units. See 

Pinch

Points/Moving Parts 

(Page 9) for hazardous areas.

Transport

The two wheels located at the rear of the machine (one on
each side) are for the purpose of boot depth control and
gearbox input drive.  These must not be used to support the
machine weight during transport (while linked to the tractor).

Ensure that all linkage pins and security clips are fitted
correctly.

Maintenance

Refer Page 25 - 26 for reference to the 

Care and

Maintenance

section of the manual.

Lubrication

Refer Page 23 for reference to the 

Lubrication

section of the

manual.

Содержание DO 07185































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды