Citation Management
AutoCITE Reference Guide
AutoCITE X3 Handheld Training Reference
AutoCITE X3 Training (2).doc
Page 28 o f 33
Date/Time Printed: 8/15/2006 10:28 AM
The next screen to be displayed is the
Vehicle
identification screen. As in the Citation Issuance
process described earlier, the Officer must enter specific identification information about the vehicle.
In addition to entering License Plate or VIN, the Officer must enter the position of the valve stem
from the front and rear tires of one side of the vehicle. This entry is based on position relative to a
12 hour clock.
The system will automatically check for a matching Mark Mode entries from earlier on the Officer’s
shift and alert the Officer if there was a match. On a succeeding sweep the same plate is marked
again, and this screen notifies the officer that the vehicle was previously marked.
The officer must enter a street the same as the succeeding marks to be considered a match. If you
were to enter Garfield for your first pass and Jones on your second pass, the handheld unit would
not alert the officer.
If a match is found, the following screen will be displayed.
