Citation Management
AutoCITE Reference Guide
AutoCITE X3 Handheld Training Reference
AutoCITE X3 Training (2).doc
Page 17 o f 33
Date/Time Printed: 8/15/2006 10:28 AM
Location Screen
The
Location
screen enables the operator to
enter key information regarding the location of the
vehicle.
The Officer may enter or select a
Meter
Location
for which he would like to enter a parking
violation. Entering, or selecting a
Meter
Location
, which is in the Meter Cross-Reference
list (if applicable), will populate other Location
information. This entry will also populate the
Meter Number
field that appears on the Vehicle
information screen. Rules for valid combinations
of Location information are contained below. The
Location information can be modified, for this
citation, if it is incorrect.
The Officer may enter or select a parking Lot or garage which he is patrolling. In this case, no other
fields on this screen will be allowed for entry. Upon entering or selecting the Lot and pressing the
Next key, the operator will be taken to the
Violation
screen.
Location Combination Rules
If the Officer enters a Block (general street number or house address), only the Street the violation
occurred on is asked for (cross streets are not applicable).
If Lot and Block are skipped, then Street and Cross streets are available for entry.
Examples of location entries
-
SHOPPING MALL is selected for the Lot
Lot
SHOPPING MALL
will print on the citation
-
123 is selected or entered for Block and Jones Street is selected for Street
Location
123 JONES STREET
will print on the citation
-
Lot and Block are skipped and Street, Cross-Street 1and 2 are entered or selected
Location
JONES STREET
Cross Streets
ALLEN RD / ARDEN AVE
will print on the citation
Upon entering the appropriate Location fields, the Officer presses the
NEXT
key to proceed to the
Violation
information screen.
