FireFlexmaster
Multi Fuel Chimney Components
For Gas, Oil, Wood and Solid Fuel
Chimney liner (SF100)
A high Quality twin skin
flexible chimney liner
made from 316 grade
stainless steel, used for
lining masonry chimney
stacks.
Nose cone (NC)
The Nose cone fixes to
the bottom of the
chimney liner and helps
prevent snagging against
the side of the flue during
installation.
Adaptor (FA160)
Used to connect the
flexible chimney liner to
rigid stove pipe at the
base of the stack. The
chimney liner sits
between the two skins
shown on the top of the
adaptor.
Closure plate (SP140)
A stainless steel
closure plate. This plate
sits at the top of the
stack and, used in
conjunction with a Top
Clamp, provides the
support required.
Top clamp (TC130)
The top clamp is used
at the top of the stack
in conjunction with a
closure plate, providing
the support required.
Cannon chimney pot
(CANN300)
For use when the
existing chimney pot is
damaged – used with
the Suspended Cowl
Rain cowl (SFC306)
Provides rain protection at
the top of the stack. Used
with the closure plate, top
clamp and top sleeve fixing
method; where there is no
chimney pot.
Suspended cowl (SCS501)
Allows for the chimney liner
to be installed without
removing the chimney pot,
and incorporates a cowl.
Fire cement (Dunseal)
Universal Fire cement in
310ml cartridge
