User Instructions
FireFlexmaster
Multi Fuel Chimney Liner is constructed using high grade,
quality assured stainless steel. With care and correct use it will provide many years
of safe, and reliable service.
It is important that you read and follow these instructions fully.
•
DO
burn the correct fuel for the appliance, such as standard fuel oil, gas, ‘clean burn’
coal, cured dry logs and cured dry peat.
•
DO
burn "seasoned", dry wood - that is split logs which have been stacked for 12-24
months under cover outside allowing a free circulation of fresh air.
•
DO
sweep the chimney before installation and then at least twice a year, more often
may be necessary depending upon the fuel and use. Instruct the chimney sweep
that only a bristle brush of the correct diameter should be used on rods - not a ball
and brush.
•
DO
avoid chimney fires. The extreme temperatures involved can damage the liner.
•
DO NOT
burn any of the following: Wet or "Green" wood, painted or treated timber,
household refuse, petrochemical by-product coal substitute. These can create soot
deposits and gases, which are toxic and will corrode the chimney liner.
•
DO NOT
allow fires to "slumber". This produces corrosive condensation in the flue and
increases the chance of chimney fires.
•
DO NOT
use this product on biomass boilers and stoves
Manufacturer Guarantee Scheme
FireFlexmaster
Multi Fuel Chimney Liner 316 grade, manufactured by H Docherty
Ltd system is guaranteed for ten years (replacement of product only) subject to the
following conditions:
The appliance must be operating normally, set correctly and
using only good quality fuels from the specified list above.
The registration card must be completed and returned at time of purchase. The guarantee
is not valid if refuse or any type of plastic is burnt, or if the appliance is located where any
substance containing Chlorine or Fluorine can be drawn into the air intakes.
Tel: 01924 373694
Fax: 01924 383459
Email:
Web:
www.dunbrik.co.uk
For Gas, Oil, Wood and Solid Fuel
