usiNg YOur
PAINTPOD
7
PAiNTiNg WALLs ANd CeiLiNgs
d
Ensuring roller head connector is
free from paint, push fit the handle
securely onto the roller head.
Lift the handle upwards and
remove the roller head from the
docking station.
Remove the paper label.
The
PaintPod makes painting easy, fast and clean. However it may take a little time to perfect your
painting technique. Practice using the roller before starting.
Ensure ‘paint’ button is illuminated.
Start rolling the dry roller on the
wall and whilst in motion squeeze
paint loading trigger to load paint
onto roller.
Keep squeezing paint loading
trigger AND keep roller in motion
until it begins to load with paint.
When sufficiently loaded, release
trigger and roll out paint to an
even finish.
IMPORTANT:
Do not continually
squeeze the trigger,
this will
overload the roller with paint
and may cause dripping. To
avoid, squeeze the trigger
INTERMITTENTLY and ONLY
when roller is in motion.
e
As paint is rolled onto the wall, the
roller will need to be reloaded with
more paint. WHILST CONTINUING
TO ROLL, squeeze paint loading
trigger to load paint onto roller.
When sufficiently loaded, release
trigger and continue painting.
To keep your work area clean
and safe, place roller head in
the docking station in the blue
chamber when pausing.
IMPORTANT:
The roller head
MUST be lowered down into the
cleaning station as shown so
it sits correctly when the lid is
closed.
c
a
Hold the delivery tube away
from the wall with your free
hand so it does not ‘brush’
against the wet paint.
b
1
2
f
1
2
7
