background image

iMPOrTANT iNfOrMATiON – 

please read before you start

• Carefully read the complete user guide before use and 

 always follow instructions including those on the paint 
 pack packaging.

• Keep user guide in a safe place for future reference.
• Dispose of all waste packaging properly.
• The 

PaintPod is for indoor use only.

• Only use 

PaintPod paint packs, parts, products 

 and accessories.

• Always wear protective clothing and as with all 

 decorating, cover furnishings, flooring etc.

• Keep area around your work place clean and tidy to 

 help avoid accidents.

• Ensure children and animals are kept away at all times 

 whilst operating the 

PaintPod.

• Always place and use the 

PaintPod on a flat, stable 

 and horizontal surface.

• Always unplug the 

PaintPod after use.

• Keep power lead away from water, heat, oil, sharp 

 edges and moving parts.

• Keep the 

PaintPod away from sources of heat, naked 

 flames or ignition.

• Only use clean warm water to clean the 

PaintPod.

• Clean the 

PaintPod thoroughly after each use to 

 ensure it works effectively next time.

• Only store the 

PaintPod when clean and dry.

• Dispose of waste water by pouring down the sink.
• DO take care not to trip over the power lead or 

 delivery tube.

• 

ONLY USE

 a CR2032 3v battery in the roller handle.

• 

WARNING

 Fire Hazard! 

DO NOT

 incinerate waste 

 batteries.

• 

DO NOT 

dispose of batteries as household waste. 

 Dispose of or recycle according to local authority 
 guidelines.

• 

DO NOT

 store batteries in any location where 

 temperatures may exceed 40

°C.

• 

DO NOT

 tamper with the battery.

• When replacing battery, follow manufacturer 

 instructions.

dO

dO NOT

BATTeries

MAiNs CONNeCTiON

disPOsAL

 

DO NOT 

use any other paint with the 

PaintPod

 Dulux PaintPod paint is specially formulated.

 

DO NOT 

modify the 

PaintPod.

• 

DO NOT 

place 

PaintPod on ladders or on stair treads.

 

DO NOT 

use hot or boiling water to clean the 

 

PaintPod.

 

DO NOT 

use solvents, detergents chemical or abrasive 

 cleaners to clean the inside or outside of the 

PaintPod.

 DO NOT 

pour paint directly into the 

PaintPod.

 

DO NOT 

use the 

PaintPod if any parts of it are 

 damaged, excessively worn, faulty or missing.

 

DO NOT 

put any object or part of your body near any 

 moving parts of the 

PaintPod.

 

DO NOT 

use the 

PaintPod with wet hands.

 

DO NOT 

use the 

PaintPod in explosive atmospheres.

 

DO NOT 

pour waste water into rain water drains, natural 

 water courses or on to land.

 

DO NOT 

pull the unit by either the power lead or 

 delivery tube.

The 

PaintPod is supplied with a power lead and a fitted 

3 amp fused plug. It operates at low voltage 
and is connected to a separate power supply unit.

IMPORTANT:

 Please read the following safety 

instructions carefully before use.
• 

DO only use the PaintPod power supply provided.

• If a replacement plug is fitted, dispose of the old 

 plug safely. 

 

DO NOT 

use the 

PaintPod if the power lead 

 is damaged.

• 

DO NOT 

use the 

PaintPod or power lead without the 

 plug’s top cover fitted. 

• ONLY USE 3 amp replacement fuses. Replacement 

 fuses must conform to BS1362.

 

WARNING: 

IF IN ANY DOUBT PLEASE CONSULT 

 A QUALIFIED ELECTRICIAN.

Once the product has reached the end of its useful life 
or if it has become damaged outside of the one year 
guarantee, please dispose of the 

PaintPod roller system 

correctly. Do not dispose of the 

PaintPod roller system 

as household waste. Take to your local authority waste 
electrical equipment disposal centre.

1

Содержание PaintPod



















Отзывы: