16
A range of spare parts are available for you to order
either on line or by telephone.
If the item required is claimable under the guarantee
(within 12 months of purchase) then please phone:
UK: 0870 444 1111
ROI: 021 422 0222
If the item required is not under guarantee then
please order on:
UK: 0844 844 2625 or www.dulux.co.uk/paintpod
ROI: 01 459 6021 or www.dulux.ie/paintpod
White chamber
(A466900050P)
Blue chamber
(A466900150P)
Docking station
(A466900250P)
Edging cup
(A466900350P)
Edging spout
(A466900450P)
Roller cage
(A466900550P)
(Including: Roller head, Feeder tray,
Distribution plate and Feeder roller)
Dip tube wipe (5 per pack)
(A466900650P)
Roller handle
(A466900750P)
Dip tube rest
(2 per pack)
(A466900850P)
Power supply unit
(A466900950P)
sPAre PArTs
Visit either www.dulux.co.uk/paintpod or www.dulux.ie/paintpod for more technical advice.
Cleaning button does not
activate cleaning cycle.
Cleaning cycle does not
clean/effectively clean tube.
Cleaning cycle does not
clean/effectively clean roller.
Drain cycle has not been carried out.
Carry out drain cycle (page 10).
Paint pack still in place.
Carry out draining and cleaning cycle (page 10).
Roller not docked in docking station
correctly (clean warning light will be
illuminated).
Place in docking station according to user guide
(page 10).
Dip tube pump wear resulting in slow/no
pumping of water.
Replace dip tube.
Inadequate cleaning on previous use
leading to blocked dip tube.
Replace dip tube.
Delivery tube twisted, kinked or otherwise
damaged.
Straighten, or replace delivery tube.
Cold water used.
Repeat cleaning cycle using warm water (page 11).
Roller handle not attached to roller head.
Ensure handle is completely engaged.
Dip tube not engaged properly.
Check orientation of dip tube (page 5).
Roller sleeve old and worn.
Replace roller sleeve (page 13).
Blue chamber lid not closed.
Check and close completely until ‘clicked’ into position.
Docking station not correctly located.
Check location and ensure that lid closes completely.
Roller not engaged in correct position.
Ensure roller is placed in position as per user guide.
Dip tube pump wear resulting in slow/no
pumping of water.
Replace dip tube.
Cold water used.
Repeat cleaning cycle using warm water (page 11).
sYMPTOM
POssiBLe CAuses
ACTiON
For convenience when painting ceilings and other high
areas, an Extra reach handle and 2 Metre extension
tube are available. These items plus the accessories
listed below are available from your local DIY retailer.
ACCessOries
Roller sleeve
(A466000250N)
Dip tube and delivery
tube (4 metre)
(A466000350N)
2 Metre
extension tube
(A466000450N)
Extra reach handle
(A466000550N)
Edging brush
(A466000650N)
TrOuBLe sHOOTiNg
