Duke SUB-GP-L, Руководство по обслуживанию

Страница: 18 / 40

Service Manual for Subway Front Counters
18
CAUTION: For front counters with curved
glass, these screws fasten the
glass extrusion to the top of
the front counters. Loosen the
screws above only one panel at a
time.
3. Lift up on the Décor Panel and pull the bottom
of the panel away from the front of the unit.
4. Remove the Décor Panel from the unit.
5. Place the Décor Panel face up on a padded
surface to prevent damage.
6. For Décor Panels with 110 Volt lights, pull the
light cord through the grommet hole in the
panel and go to step 10. For 220 Volt lights
go to step 7.
7. Place a piece of cardboard on the graphic where
the metal light clip is mounted and remove
the metal light clip with a Phillips head screw
driver.
Two Versions of Purse Rail Light Fixtures
8. Disconnect the light cord from the fi xture.
9. Remove the wire grommet from the cord and
feed the cord out of the Décor Panel.
10. Place a piece of cardboard near each of the
Light Cover mounting screws and remove the
screws with the 5/16″ nut driver.
11. Remove the Light Assembly from the Purse Rail.
12. Turn the Décor Panel over (face down) on the
padded surface.
13. Remove the Purse Rail mounting screws.
14. Mark the location of the Purse Rail with a pencil.
15. Remove the Purse Rail.
NOTICE: Use a putty knife working from one end
to loosen the silicone sealer. It may be necessary
to tap the Purse Rail with the rubber mallet to
break the silicone loose.
17. To avoid damaging the Décor Panel, very
carefully scrape off the dried silicone.
18. Refer to the pencil marks made earlier on the
Décor Panel and place a bead of clear silicone
within the marks.
19. Run a bead of clear silicone along the edge
of the new Purse Rail.
20. Align the new Purse Rail with the pencil marks
on the Décor Panel.
21. While holding the new Purse Rail in place,
screws into each end of the Purse Rail to
secure it to the Décor Panel.
22. Turn the Décor Panel face down and install
the remaining Purse Rail screws.
Light Assembly Centered on New Purse Rail