background image

2

Installation and Operation of: 

FlexBake 5™ Integrated Ventilation System

IMPORTANT SAFETY INSTRUCTIONS

Throughout this manual, you will find the following safety words and symbols that signify 

important safety risks with regards to operating or maintaining the equipment.

 

Indicates a hazardous situation which, if not avoided, could 

result in death or serious injury.

CAUTION

 

Indicates a hazardous situation which, if not avoided, could    

 

result in minor or moderate injury. 

     

CAUTION

 

Indicates Important Information

 

                  

Indicates electrical shock hazard which, if not avoided, could 

result in death or serious injury and/or equipment damage.

                   

Indicates hot surface which, if not avoided, could result in 

minor or moderate injury. 

 Indicates hot surface which, if not avoided, could result in 

minor or moderate injury.  Specifically, risk of burn from 

heating elements.

                                  

Indicates rotating fan blade hazard which, if not avoided, 

could result in minor or moderate injury.

TABLE OF CONTENTS 

Important Safety Instructions ............................................................................................................................ 2
Specifications ........................................................................................................................................................... 4
Wire Schematic........................................................................................................................................................ 5
Unpacking Instructions ........................................................................................................................................ 6
Removal of Old Facade ......................................................................................................................................... 6
Installation of  New IVS Hood ............................................................................................................................ 8
Configure IVS Hood to FlexBake

TM 

 .................................................................................................................11

Oven Start Up ........................................................................................................................................................12
Care and Cleaning ................................................................................................................................................12
Troubleshooting ...................................................................................................................................................12

Содержание FlexBake 5 IVS-208-FB5













Отзывы: