Duke Fitness DU-XB40, Руководство по сборке и эксплуатации

Страница: 14 / 32

14
XB40
Step 4: Mounting the pedals
L
NOTICE
The pedals are marked with “R” for right and “L” for
left. The sides of the equipment are determined by
the seat direction.
1. Left pedal: Stand in front of the left side of
the equipment and screw the left
pedal (10L) counterclockwise to the
left crank (9L).
2. Right pedal: Stand in front of the
right side of the equipment and
screw the right pedal (10R)
clockwise to the right crank
(9R).
3. Once the threads are fully
connected, tighten the
pedals with the tool.
⚠
CAUTION
Only use the equipment when the pedals
are firmly tightened.
Step 5: Mounting the handlebar and the computer
1. Remove the two curved washers (7) and two bolts (22) from
the handlebar (4).
2. Mount the handlebar (4) to the rear frame (2) with two curve
washer (7) and two bolts (22).
3. Insert the provided 1.5 V batteries (2
pcs.) into the battery comparment of
the computer (23). Pay attention to the
correcht polarity.
4. Remove the two screws (20) from the
computer (23) and insert the sensor
wire of the computer (23) through the
opening on the support.
5. Connect the sensor wires
and mount the computer
(23) to the support with
the previously removed
two screws (20).
6. Tighten all screws.