Dukane iQ Auto-Plus 20AT060-U Series Скачать руководство пользователя страница 2

Страница: 2 / 71

Page ii

Series

Auto-Plus User’s Manual

Dukane Manual Part No. 403-591-01

Printed in the United States of America.

Dukane Part Number: 403-591-01

Dukane ultrasonic equipment is manufactured under one or more of the following U.S. Patents:

(* = Inactive)
3,780,926 * 4,131,505* 4,277,710* 5,798,599* 5,880,580* 6,984,921* 7,225,965 7,475,801,

7,819,158, 8,052,816, and 10,710,310.

Dukane

2900

Dukane

Drive

St. Charles, IL 60174 USA

Notice of Rights

reproduced, transmitted or utilized in any form or by any means, electronic, mechanical, photocopying,

recording, or by any information storage and retrieval system, without written permission from Dukane.

Notice of Liability

The information contained in this manual is distributed on an “As is” basis, without warranty. While

every precaution has been taken in the preparation of this manual, Dukane shall not have any liability to

any person or entity with respect to any liability, loss, or damage caused or alleged to be caused directly

or indirectly by the instructions contained in this manual, or by the hardware products described herein.

Specifications subject to change without notice.

This user’s manual documents product features, hardware, and controls software available at the

time this user's manual was published.

Содержание iQ Auto-Plus 20AT060-U Series








































































Результаты поиска

Содержание iQ Auto-Plus 20AT060-U Series

Отзывы:

Похожие инструкции для iQ Auto-Plus 20AT060-U Series

Бренды по названию

Популярные бренды

Dukane iQ Auto-Plus 20AT060-U Series, Руководство пользователя

Результаты поиска

Содержание iQ Auto-Plus 20AT060-U Series

Отзывы:

Похожие инструкции для iQ Auto-Plus 20AT060-U Series

Бренды по названию

Популярные бренды