44
QM00193 - 2
3.1 Projector Web Control - Network Settings (continued)
3. Web Control
1. Simple Access Point settings
Item
Description
,3&RQ¿JXUDWLRQ
Configures the IP Address of the projector in Simple
Access Point mode.
Subnet Mask of this mode is fixed to 255.255.255.0.
SSID
*1
Configures SSID of Simple Access Point mode.
SSID Broadcast
Switches ON/OFF of SSID Broadcast.
When this function is set to OFF, SSID of the projector
is not displayed in wireless connection list of the
device.
Encryption
Selects data encryption method.
WPA Passphrase
*2
Configures WPA Passphrase.
Wireless Freq.
Configures the frequency for the wireless connection.
Bandwidth
Configures the frequency bandwidth for the wireless
connection.
If you want to get a higher link speed, change this to
40MHz or 80MHz.
Channel
Selects the wireless channel.
The selectable channels are different depending on the
wireless frequency band and Bandwidth.
*1 The text length can be up to 32 alphanumeric characters and symbols. Only
symbols “!"#$%&'()*+,-./:;<=>?@[\]^_'{|}~ and space” can be used.
*2 The text length can be 8 to 63 alphanumeric characters and symbols. Only
symbols “!"#$%&'()*+,-./:;<=>?@[\]^_'{|}~ and space” can be used.
(continued on next page)
• This projector uses the 5 GHz and 2.4
GHz radio frequency band, but depending on the
country or region you are in, the channels that
you can use might be limited. Please consult your
dealer for information on the usable channels.
NOTE
• Depending on your internet connection,
the projector may not operate with the bandwidth
you set or you may not get a higher link speed.
NOTE