30
QM00193 - 2
Item
Description
NETWORK
SETUP
/
PROJECTOR
NAME
Any name can be set to the projector to identify it on the
network.
(1) Select the PROJECTOR
NAME and press the ►
button. The PROJECTOR
NAME dialog will be
displayed.
Use displayed software keyboard to enter PROJECTOR
NAME.
(2) The current PROJECTOR NAME will be displayed on the
first 3 lines.
Use the
ENTER
or button to select and enter
characters.
To erase 1 character at one time, press the
RESET
button
or press the ◄ and button at the same time. Also if
you move the cursor to DELETE or CLEAR ALL on screen
and press the
ENTER
or button, 1 character or all
characters will be erased. Up to 64 characters can be
input for the PROJECTOR NAME.
(3) To change an already
inserted character, move
the cursor to one of the first
3 lines, and move the cursor
on the character to be
changed. After pressing the
ENTER
or button, the
character is selected. Then,
follow the same procedure
as described at the item (2)
above.
(4) To finish entering text, move
the cursor to the OK on
screen and press the ►,
ENTER
or button.
To revert to the previous PROJECTOR NAME without
saving changes, move the cursor to the CANCEL on
screen and press the ◄,
ENTER
or button.
(continued on next page)
2. Connection to the network