Dukane 8789H Скачать руководство пользователя страница 67

Страница: 67 / 72

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects

About the phenomenon confused with a machine defect, check and cope with it

according to the following table.

Phenomenon

Cases not involving a machine defect

Reference

page

Power does not

come on.

The electrical power cord is not plugged in.

Correctly connect the power cord.

The main power source has been interrupted during

operation such as by a power outage (blackout), etc.

Please disconnect the power plug from the power outlet,

and allow the projector to cool down at least 10 minutes,

then turn the power on again.

11, 13

Either there is no lamp and/or lamp cover, or either

of these has not been properly fixed.

Please turn the power off and disconnect the power plug from

the power outlet, and allow the projector to cool down at least

45 minutes. After the projector has sufficiently cooled down,

please make confirmation of the attachment state of the lamp

and lamp cover, and then turn the power on again.

57, 58

Neither sounds

nor pictures are

outputted.

The signal cables are not correctly connected.

Correctly connect the connection cables.

Signal source does not correctly work.

Correctly set up the signal source device by referring to the

manual of the source device.

–

The input changeover settings are mismatched.

Select the input signal, and correct the settings.

15, 16

The BLANK function for pictures and the MUTE

function for sounds are working.

AV MUTE may be active.

Refer to the item “Sound does not come out” and “No

pictures are displayed” on the next page to turn off the

MUTE and BLANK functions.

15, 22,

(Continued on next page)

Содержание 8789H









































































Результаты поиска

Содержание 8789H

Отзывы:

Похожие инструкции для 8789H

Бренды по названию

Популярные бренды

Dukane 8789H, Общее руководство пользователя

Результаты поиска

Содержание 8789H

Отзывы:

Похожие инструкции для 8789H

Бренды по названию

Популярные бренды