43
SCREEN menu
Item
Description
SOURCE NAME
Each input port for this projector can have a name applied to it.
(1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE
NAME and press the ► or
ENTER
button.
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE
NAME menu to select the port to be
named and press the ► button. The
SOURCE NAME dialog will be displayed.
Right side of the menu is blank until a
name is specified.
(3) Select an icon you'd like to assign to the
port in the SOURCE NAME dialog. The
name assigned to the port will also be
automatically switched according to your
icon selection. Press the ► or
ENTER
button to determine your icon selection.
(4) Select a number you'd like to assign for
the port along with the icon. You can
select the number either from blank (no
number assigned), 1, 2, 3, or 4.
(5) If you'd like to modify the name assigned
to the port, select CUSTOM NAME and
press the ► button.
(6) The current name will be displayed on
the first line. Use the ▲/▼/◄/► buttons
and the
ENTER
or
INPUT
button to
select and enter characters. To erase 1
character at one time, press the
RESET
button or press the ◄ and
INPUT
button
at the same time. Also if you move the
cursor to DELETE or ALL CLEAR on
screen and press the
ENTER
or
INPUT
button, 1 character or all characters will
be erased. The name can be a maximum
of 16 characters.
(7) To change an already inserted character,
press the ▲ button to move the cursor to the
first line, and use the ◄/► buttons to move
the cursor on the character to be changed.
After pressing the
ENTER
or
INPUT
button, the character is
selected. Then, follow the same procedure as described at the
item (6) above.
(8) To finish entering text, move the cursor to the OK on screen and
press the ►,
ENTER
or
INPUT
button. To revert to the previous
name without saving changes, move the cursor to the CANCEL
on screen and press the ◄,
ENTER
or
INPUT
button.
(continued on next page)
