Dukane 8789H Скачать руководство пользователя

Страница: 64 / 72

Troubleshooting

Troubleshooting

If an abnormal operation should occur, stop using the projector immediately.

Otherwise if a problem occurs with the projector, the following checks and measures are

recommended before requesting repair.

If this does not resolve the problem, please contact your dealer or service company. They

will tell you what warranty condition is applied.

►Never use the projector if abnormal operations such as smoke,

strange odor, excessive sound, damaged casing or elements or cables, penetration

of liquids or foreign matter, etc. should occur. In such cases, immediately disconnect

the power plug from the power outlet. After making sure that the smoke or odor has

stopped, contact to your dealer or service company.

WARNING

Related messages

When some message appears, check and cope with it according to the following table.

Although these messages will be automatically disappeared around several minutes, it will

be reappeared every time the power is turned on.

Message

Description

There is no input signal.

Please confirm the signal input connection, and the status

of the signal source.

The horizontal or vertical frequency of the input signal is

not within the specified range.

Please confirm the specs for your projector or the signal

source specs.

An improper signal is input.

Please confirm the specs for your projector or the signal

source specs.

The internal temperature is rising.

Please turn the power off, and allow the projector to cool

down at least 20 minutes. After having confirmed the

following items, please turn the power ON again.

• Is there blockage of the air passage aperture?

• Is the air filter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the remedy, please set

FAN SPEED of the SERVICE item in the OPTION menu to HIGH.

A note of precaution when cleaning the air filter.

Please immediately turn the power off, and clean or change

the air filter referring to the “Cleaning and replacing the

air filter” section of this manual. After you have cleaned or

changed the air filter, please be sure to reset the filter timer

(



)

The button operation is not available

(



)

Содержание 8789H









































































Результаты поиска

Содержание 8789H

Отзывы:

Похожие инструкции для 8789H

Бренды по названию

Популярные бренды

Dukane 8789H, Общее руководство пользователя

Результаты поиска

Содержание 8789H

Отзывы:

Похожие инструкции для 8789H

Бренды по названию

Популярные бренды