34
3. Convenient Features
NOTE:
• The [LIGHT MODE] can be changed by using the menu.
Select [SETUP]
→
[INSTALLATION(1)]
→
[LIGHT MODE]
→
[LIGHT MODE].
• The light module used hours can be checked in [USAGE TIME]. Select [INFO.]
→
[USAGE TIME].
• After a lapse of 1 minute from when the projector displays a blue, black or logo screen, the projector will automatically lower
the brightness to the equivalent level of [ECO2] when [NORMAL] or [ECO1] has been selected for [LIGHT MODE] and it will be
automatically back to the previous brightness when it detects input signal.
• If the projector is overheated in [NORMAL] or [ECO1] mode, there may be a case the projector automatically lowers the bright-
ness as a protective function. This is called “Forced ECO MODE”. When the projector is in the Forced ECO MODE, the picture
brightness decreases slightly and the TEMP. indicator lights orange. At the same time the Thermometer symbol [ ] is displayed
at the bottom right of the screen.
When the ambient temperature is lowered under approx 33°, the Forced ECO MODE is cancelled and the projector goes back into
the previously set state.
Содержание 6765WUSS
Страница 72: ......
